EN
Landa H1625 12V/24V DC Holding Solenoid, 10N Magnetic Holding Force, Ø16 × 25 mm Compact Electromagnet for Industrial Fixtures and Automation
Landa H1625 Compact DC Holding Solenoid 10N for Industrial Fixtures
- Overview
- Recommended Products
- CNC and automated assembly fixtures
- Robotic transfer and indexing tooling
- Inspection and test nests
- Temporary fixing of ferromagnetic components
Landa H1625 Round Holding Solenoid
Power ON to hold · Power OFF to release
Compact DC holding solenoid for industrial fixtures, automated handling and reliable part positioning.
Operating Principle
Apply the specified DC voltage to create magnetic holding force on a ferromagnetic workpiece. Remove power to release it. This simple power-controlled action supports repeatable fixture cycles and safe automated handling.
Landa H1625 Round Holding Solenoid
Power ON to hold · Power OFF to release
Compact DC holding solenoid for industrial fixtures, automated handling and reliable part positioning.
Operating Principle
Apply the specified DC voltage to create magnetic holding force on a ferromagnetic workpiece. Remove power to release it. This simple power-controlled action supports repeatable fixture cycles and safe automated handling.
Technical Specifications
| Item | H1625-12A90 | H1625-24A360 |
|---|---|---|
| Product type | Round holding solenoid | |
| Body size | Ø16 mm × 25 mm | |
| Mounting | M4 × 8 center hole | |
| Lead wire | 200 mm, UL1007 26 AWG | |
| Weight | 25 g | |
| Voltage / resistance at 25°C | 12 VDC / 90 Ω | 24 VDC / 360 Ω |
| 100% duty | Continuous ON; 1.6 W; 10 N holding force at 25°C | |
| 50% duty or less | Maximum ON time 50 s; 3.2 W; 12 N holding force at 25°C | |
| Insulation | Class B (130°C) | |
| Hi-pot test | AC1000 V, 50/60 Hz, 2 s | |
Industrial Applications
H1625 fits compact workholding and positioning systems where reliable magnetic engagement and a power-controlled release are required.
Controlled Release and Efficient Operation
Use the 12 VDC or 24 VDC version that matches your control system. Continuous duty is available at 1.6 W; for 50% duty or less, the specification allows up to 3.2 W and a maximum ON time of 50 seconds. Follow the duty-cycle limits during system design.
Mounting and Contact Guidance
Use a flat, clean workpiece surface with good magnetic conductivity. A material thickness over 3 mm is preferred, and the contact area should be larger than the magnet face. Secure the H1625 through its M4 × 8 center hole and protect the 200 mm lead wires from bending and abrasion.
Integration Support
For application review, share the workpiece material, mass, thickness, contact dimensions, operating orientation, holding duration, release timing and required quantity. Landa can support fixture integration, sampling and production validation.
