EN
Landa H1010 10 mm Holding Solenoid | 1 N Continuous Holding Force
Compact round electromagnet for industrial workholding and automated positioning. Power on to hold ferromagnetic parts; power off to release.
- Overview
- Recommended Products
- Compact workholding in assembly fixtures.
- Precision positioning of ferromagnetic parts.
- Inspection nests and automated tooling.
- Small robotic transfer and pick-and-place fixtures.
- Use a ferromagnetic workpiece with good magnetic conductivity.
- Keep the contact surface flat and clean.
- Workpiece thickness greater than 3 mm is preferred.
- The contact area should be larger than the magnet holding face.
The Landa H1010 is designed for controlled fixing and release of ferromagnetic workpieces in industrial handling, assembly fixtures and automation tooling. Power on to hold; power off to release. Use a flat, clean contact surface and validate the complete assembly against the H1010 specification sheet.
Landa H1010 Miniature Holding Solenoid
Power on to hold. Power off to release.
The H1010 is a compact Ø10 × 10 mm holding solenoid for precision fixtures and positioning of ferromagnetic parts. Its small body and 50 mm UL1571 28 AWG leads suit space-limited tooling and automation.
Controlled Holding for Compact Fixtures
POWER ON — HOLD: the coil creates magnetic holding force for a suitable ferromagnetic workpiece.
POWER OFF — RELEASE: removing coil power releases the magnetic holding force.
Use the correct voltage variant and follow the duty-cycle limits in the specification table.
Compact Two-Wire Integration
H1010 uses a simple two-wire connection and a miniature cylindrical housing for compact jigs, nests, inspection fixtures and positioning tooling.
Technical Specifications
| Model | H1010 |
|---|---|
| Type | Miniature holding solenoid |
| Body dimensions | Ø10 mm × 10 mm |
| Mounting | M2 screw, 4 mm depth |
| Lead wire | 50 mm, UL1571 28 AWG |
| Net weight | 4 g |
| Voltage variants | H1010-3.3A12: 2.5 / 3.3 VDC H1010-06A36: 4.3 / 6 VDC |
| 100% duty | 0.5 W; 1 N holding force; continuous ON time |
| ≤50% duty | 1 W; 1.5 N holding force; maximum ON time 100 s |
| Insulation | Class B (130°C) |
| Hi-pot test | AC600 V, 50/60 Hz, 2 s |
Fixture and Automation Applications
Contact Conditions
OEM Quality and Support
Landa supports OEM integration and application review. Provide your material, mass, thickness, contact dimensions, orientation, holding duration, release timing and quantity when requesting evaluation.
Discuss Your Application
Validate the selected voltage, holding force and duty cycle in the complete assembly before production use.
